![]() Connect the camera to the computer directly using the dedicated USB cable.Loose connections can cause faults or malfunctions. Push the plug firmly all the way into the socket.Use only the dedicated USB cable to connect the camera to your computer.The EOS Kiss REBEL 300D screen (event screen) and the Scanner and Camera Wizard dialog box appear.Open the cover and plug the cable connector into the terminal with the (USB) icon facing the front of the camera.Plug the dedicated USB cable into your camera. Refer to the User's Manual for your computer for details. The location of the port differs depending on your computer.Plug the cable into the USB port on the computer.Plug the dedicated USB cable into the computer. ![]() Disconnect the DC coupler (optional) or unplug the AC adapter (optional) or power cord.īefore you perform the operations below, be sure to exit the software being used.Disconnect the dedicated USB cable or remove the battery.Never perform the following operations while the software installed from the SOLUTION DISK is running after connecting the camera to the computer, as a communications error may occur: When you connect the camera to your computer, be sure to follow the procedure below.You can connect the camera while your computer is running. Connect the camera to your computer with the dedicated USB cable so that they can communicate.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |